Toy Information » Skateboards

Smoothest Ride

ToyBusiness — Fri, 28 Oct 2011 19:12:49 +0000

Longboard skateboards are basically skateboards that are longer and wider than traditional skateboards. They are commonly used for racing, cruising, sidewalk surfing, or simply to move from one place to another. A longboard is generally heavier than a standard skateboard and is not usually used to perform stunts or tricks. Arbor longboards offer several benefits over typical skateboards. They offer more stability than regular skateboards because of their larger wheels.

There are different types of Arbor longboard skateboards to choose from. You have the FlexDeck Pro that offers a fast ride, while the Arbor Fleetwood Cruiser provides a relaxed smooth ride. The Flowboard is well-known for its unique turning abilities, and the Dervish-Bamboo Longboard provides a lower center of gravity. There are many online stores on the Internet that sell Arbor longboard skateboards, which would typically cost between $100 and $200 US dollars.

It’s Not the Same

ToyBusiness — Thu, 22 Sep 2011 22:58:09 +0000

A lot of people think that skateboarding and longboarding are the same. But what they don’t know is that they have distinct differences that set them apart. Some of this is that longboarding can be done on hills and wider roads. On the other hand, skateboarding will be a very hazardous thing to do in such places. Also, they have different boards to be used.

A longboard skateboard is different from the traditional skateboard because, obviously, it is longer. They measure from about 80-150 centimeters. It is also shaped based on a surfing board. They also have a different wheel size and other features that are very different from traditional skateboards.

Perfect Cruiser

ToyBusiness — Wed, 31 Aug 2011 18:14:58 +0000

Just like what its name suggests, a longboard skateboard is a type of skateboard that is significantly longer than a traditional skateboard. The length, and certain differences in the basic design, allow for a kind of skateboarding called “longboarding”, which is highly similar to surfing or snowboarding. These longboard skateboards can perform in ways that regular skateboards cannot, although there are also maneuvers or stunts, where longboards are not ideal.

Longboards and regular skateboards share many of the same basic features such as decks, wheels, trucks, riser pads, and bearings. However, when it comes to basic specifications, most longboards are between 35 and 60 inches in length. Unlike traditional skateboards, longboard skateboards are not good boards for performing stunts. As with most types of purchases, it is best to shop around before selecting a longboard since a longboard skateboard will cost a little more than a traditional skateboard.

Born to Ride

ToyBusiness — Tue, 09 Aug 2011 21:49:08 +0000

A skateboard is a specially designed plywood board combined with a polyurethane coating used for making smoother slides and stronger durability that is used primarily for the activity called skateboarding. There are different skateboard accessories which may include skateboard clothing, as well as the parts of the skateboard itself. There are actually several parts of a skateboard aside from the board and the wheels. These parts are significant to a skateboard’s performance during use.

The primary parts of a skateboard are the deck, the trucks, the wheels and bearings, the hardware, and the grip tape. The deck is the board itself and is often made of plywood. Trucks are the parts of the skateboard that attach underneath and directly to the deck. The wheels are plastic urethane and often vary in hardness. These wheels come in various sizes to achieve different performance levels. Grip tape is the rough, self adhesive covering that is applied to the top of the deck.

Wild Stunts

ToyBusiness — Mon, 11 Jul 2011 18:35:41 +0000

Rune Glifberg is a professional skateboarder residing in Encinitas, California. Glifberg began skating when he was 11 years old when a friend brought a board over to his house. This skateboarder signed on with Flip Skateboards, which gave rise to the Flip Glifberg line of skateboards. Rune Glifberg still skates for Flip Skateboards and is quite well known for his wild stunts in pools as well as vert ramps. He is part owner of the company called Pipeline Distribution.

Glifberg currently has a line of signature skater shoes with Converse called the Allston and the Rune Pro Mid. He also owns a Copenhagen based event company called RunEvent which was the organizer of 2010’s “Burning of the Witch” skateboard contest at Amager Strandpark in Denmark. RunEvent is currently organizing Rune’s 25th skateboarding anniversary to be held in Copenhagen in the summer of 2011.

Downhill Cruise

ToyBusiness — Thu, 07 Jul 2011 19:57:30 +0000

Longboards and regular skateboards share many of the same basic features. Both types of boards have decks, wheels, trucks, riser pads, and bearings. A longboard with all of the basic features are referred to as complete longboards. When it comes to basic specifications, longboards are generally longer than skateboards and measure between 35 and 60 inches in length. There are a variety of deck designs including the hybrid, pintail, and drop-deck designs.

Longboarding is the widely accepted term for riding a longboard skateboard. Unlike traditional skateboards, longboard skateboards are not good boards for performing stunts. A skateboarder can shop for and purchase a longboard skateboard from most of the places where he can find regular skateboards. It is also important to note that generally, a longboard skateboard will cost a little bit more than a traditional skateboard. Never forget to wear the prescribed safety gear when riding any type of board.

Durable Reliability

ToyBusiness — Thu, 09 Jun 2011 20:02:30 +0000

There are other parts of a skateboard aside from the board and the wheels. These other less known parts are also significant to a skateboard’s performance during use. The primary parts of a skateboard are the deck, the trucks, the wheels and bearings, the hardware, and the grip tape. You can now find top skateboard trucks and other parts and accessories at online stores by going online through the Internet.

The deck is actually the board itself. The trucks are the parts of the skateboard that attach underneath and directly onto the deck. The trucks are still comprised of other smaller parts, which include axles, bushings, and kingpins. These are generally made of aluminum alloy or titanium and come in a wide variety of colors. The wheels of a skateboard are often made from plastic urethane and vary in levels of hardness.

Learning How to Skate

ToyBusiness — Mon, 18 Apr 2011 19:33:43 +0000

It’s easy to learn how to use a skateboard. It’s best to have an experienced skater with you, but for purposes of leisure skateboarding, there are some basic steps which we can narrate from experience. But first and foremost you should have your protective gear on so that you’re safe in case you do fall. Having protective gear like a helmet or skateboarding clothing is something most people choose to ignore. This is a no-no, because skateboarding can get extremely dangerous.

For a regular skateboard, put one foot on the board – you’re right foot if you’re more sturdy and comfortable with this side. Place it in the middle of the board, or a little bit forward but still in the middle. Lift your other foot, then at the start, gently move it forward then in a circular motion guiding your foot to the ground. Then nudge (still left foot) backward so that your skateboard moves forward. Make sure your right foot is planted firmly on the skateboard. Just repeat the motion of your left foot until you get the feel of it. It’s the same for a complete longboard.

Just Like Skateboarding

ToyBusiness — Fri, 09 Jul 2010 21:57:22 +0000

Longboarding is usually compared to surfing on concrete. Longboards are essentially surfboards with wheels. They are commonly used for cruising, shalom racing, downhill racing, or as transportation. Longboards come in different shapes which depend on the type of ride the user intends to do. They are heavier and bulkier which make them unsuitable for many skateboarding tricks.

However, the longboards’ size and weight contribute to better fluid motion as it provides more momentum. Longboard equipment is almost the same as skateboard equipment. You will also have to wear gloves and a helmet aside from the wrist, elbow, and knee protection. If you usually ride downhill, wear slide gloves which are made out of strong materials to protect your hands from being scraped on the pavements.

Life’s Changes

ToyBusiness — Wed, 02 Jun 2010 16:43:18 +0000

There was a time when you ate all you want and you still remained in top form. You didn’t have to watch what you eat. You never had to drag yourself to the gym to do those repetitive and boring exercises. That was a time when you did only the things you enjoyed doing. You never had to worry about some fat deposits here or there.

That time was called childhood. A time when you were worry-free about your body since you were always in shape. But since you are now in your mid-twenties, you know that your body needs more work to maintain its shape. You need to exercise a bit more. But you hate going to the gym. You can still have fun while exercising by doing the things that you used to enjoy years back. Get a skateboard and enjoy working out.